2012年1月10日星期二

Air slide belt


Material: polyester high tenacity filament

one side PU coated,standard colour yellow PU-coating increases the abrasion resistance.
No caking , not bacteria growths or fungus, consistent moisture absorption, rotting resistant.light weight and flexible,easy to coil ageing and ozone resistant
weather resistant minimum maintenance.
2.cold resistant to -30 degree
  heat resistant up to +160 degree

warp:100% weft:100%

3 Dimension:Standard diameter 76 mm other diameter on request.
Standard lengths are 30m,50m,100m.Max length uo to 500m and also avilable in any other length.

4 Thickness:1.0-2.2mm

5. Air resistance(0.23MPa 2M/m min): 0.2 15KPa

Tech airslide hose (Aeration hose) are usually used for bulk cement trailer discharging. It always woking on the bottom of the trailer. Through inflation by air compressor, it makes the bulk cement discharging from the trailer. It is really very similar as Fire hose frame. But it's much more strength and impact toughness than fire hose. One side of our hose is the PU coating. It is for block off the air flow. Air slide hose allow air to pass through, it is manufactured to meet specific permeation ranges ensuring uniform volumes of air to pass through at standard pressure.

 Airslide Hose Applications:

Our products can be applied to aertion of bulk powders and granular in silos and silo wagons.Air slide hose are used in different Industries:

    Powered station dust filter
    Flue ash discharging dust coal,
    Cement gypsum limestone,
    Calcium hydroxide, phosphates clay pure, concentrate aluminium
    Chemical Industry,
    Rubber compounds dust sintex
    Silos/Tank discharging system chute bottom convey system

The application of Filter product in the power industry

With the economy rapid development, increasing demand for electricity surge,is become one important thing to the government.stable and adequate power supply as an economic in-depth development of a strong guarantee. Government and retail investors at this point have the same knowledge, which have invested a huge force in the construction of power plants around the country to increase the supply of electricity.

At the same time, people also have realized the importance of the natural environment, such as clean air and pure sky. With the rapid growth of electricity demand, people's environmental awareness is also a corresponding increase, the government also enacted a limit on emissions from power plants (less than 50mg/Nm3), it all makes efficient flue gas purification has been a great market attention.

Selecting the appropriate filtration products, we must first distinguish between the power plant combustion system with layer combustion, fluidized bed combustion or coal combustion. In addition, some other parameters, such as fuel, or operating temperature, sulfur content must also be taken into account. Terry in this area for many years of research and practice, will be able to ensure the filter selected professional and reliable.

2012年1月4日星期三

Buy Ideal Filter Paper

Nowadays,there are so many products on the market right now that you can alter. Like different paper,we know students always use it,but there are differnt material paper are used in different or special filed.And since we all have at least a little bit of artist within us, I’d like to share with you one technique with a new product I recently discovered. Last week I purchased a package of Fancy Pants Designs Filter Paper Embellishments. I couldn’t wait to alter them and give them a try. What I discovered was how difficult to find a good quality filter paper,yes,it is a bad,but now I have a access to know it.easily they take alteration and low price you can get them,If you also want to buy filter paper.

For today’s tutorial you will need the filter paper embellishments from Fancy Pants Designs, some misting ink, and a scratch piece of paper.

I can give you some suggestions,if you want to buy ideal filter paper,Suita filter products is good choice.

Filter Paper Assays for Insecticide Research

In searching for new weapons in their fight against the destructive mountain pine beetle, scientists at the USDA Forest Service are experimenting using filtration techniques to create more effective insecticide treatment. It is estimated that 8% of forests in the United States are at risk to insect or disease outbreaks; among this percentage the mountain pine beetle is considered the biggest threat.

Mountain Beetle:The Mountain Pine Beetle (Dendroctonus ponderosae) Photo credit: Colorado State Forest Service

It’s necessary to find new solutions to protect these trees because of concerns about the future availability of one of the most commonly used insecticide chemicals, carbaryl, for environmental reasons. A study published this year examined the effectiveness of different concentrations of carbaryl along with two other known insecticides, cyantraniliprole and Cyazypyr (30 Scrabble points!).

For this experiment the researchers performed two different assays, one involved exposing the beetles to insecticide with filter paper and one through a topical treatment. For both tests they used 1 mL of various concentrations of the insecticides along with 934-AH filter paper (1.5 micron pore size, 90 mm diameter) stored in a sterile petri dish and dried in a fume hood.

In the filter paper assay, small holes were drilled into the petri dish to provide ventilation and captured beetles were placed on the filter paper. The health of the beetles was then assessed at regular intervals to determine the effectiveness of each insecticide concentration. In the topical assessment, the insecticide was applied directly onto the beetles which were then placed on top of the filter discs.

The results of the filter paper assays, which the authors believes more closely approximates field conditions than topical assays, found that is possible that much smaller amounts of carbaryl could be effective in the field, which is good news for the environment as concerns over the toxicity of this chemical have grown. As such, the authors recommend that smaller concentrations of carbaryl be tried in the field. Take that, pesky beetles!

2012年1月3日星期二

Comparison Between Cartridge Filters and Bag Filters

In many filtering applications, To choice use cartridge filter or a bag filter have a little difficult,at first you should know both of them. Both are good sediments filters, that is to say they reduce the amount of sediments transported by the fluid trough filtration.But they have differences with each other.

First the choice of cartridge filter depends on the application. In fact,Cartridge filters are preferable for systems with contaminations lower than 100 ppm, that is to say with contamination levels lower than 0.01% in weight.you can choice cartridge filter.

Second Cartridge filter own surface or depth-type,this two types: depth-type filters capture particles and contaminant through the total thickness of the medium, while in surface filters (that are usually made of thin materials like papers, woven wire, cloths) particles are blocked on the surface of the filter.Surface filters are the best if you are filtering sediment of similar-sized particles. Compared with pleated surface filters, depth filters have a limited surface area, but they all have the advantage of depth.

It can be generally stated that if the size of filter surface is increased, higher flows are possible, the filter last longer, and the dirt holding capacity increases. Cartridge filters are normally designed disposable: this means that they have to be replaced when the filter is clogged.

Then Bag filters are frequently used for dust removal in industrial applications. The flow can be from the outside to the inside of the filter (that means, the separation of particles happens on the external surface of the filter) or the other way around, depending on the application. The particles are normally captured on the internal surface of the bag filter.

Bag filters are in general not designed for replacement when they are clogged, but some bag filters for gaseous applications like dust removal can be cleaned, for example by mechanical shaking or by backwashing with compressed air (so called reverse-flow bag filters).

Bag filters are mostly surface-type filters.A rule of thumb is that for concentrations higher than 5 mg/m3 a surface filter is favored, while for concentrations lower than 0.5 mg/m3 a depth-type filter is preferred. In general surface filters can by backwashed and cleaned more easily, while depth-type filters normally have to be disposed when clocked.

Filter bags

Suita filter bags bring a new, high-performance alternative to applications requiring absolute filtration. Suita have their own brand and own website, many different filter products there.especially filter bag,their progressive density depth filtration delivers high efficiency up to 99.9% and for long life like a filter cartridge with all the convenient features of a bag filter.They are good filter material. In comparison with other filtration technologies, PROGAF delivers lower operating costs while retaining the ease of change-out typical of a bag filter.
Many filter products you can find from :http://www.suitafilter.com/

Mongolia Focuses On Bag Filters To Reduce Air Pollution

Chinese province,Inner Mongolia is the main location of the Chinese coal industry.This iron industry and steel industry and suffers from considerable air pollution.We know it is becoming more and more worse,because the air is gradually polluted. Among other things, this is caused by the biggest arch mine of Inner Mongolia, the biggest niobium mine of China and the worldwide biggest rare earth mine. The region has put in place a new five-year plan to tighten emissions, reducing industrial dust issues and improving of air quality.

The delegation was interested in the bag filtering installations of Intensity-Filter, which show energy-efficient solutions and a reduction of dust issues. How we can do with this issues? If the Traditional dust filter or air filter product is still good at the production progress? Maybe we should pay more attention to those.A return visit of Intensity-Filter management to Mongolia is planned shortly.